Simulador Modbus - Documentação
9. Getting Started
9.1 System Requirements
|
Component |
Requirement |
|
Operating System |
Windows 10 or Windows 11 (64-bit) |
|
RAM |
4 GB minimum |
|
Disk Space |
100 MB + training data storage |
|
Network |
Ethernet adapter (for Modbus TCP) |
|
Serial Port |
COM port or USB-to-Serial (for Modbus RTU) |
|
.NET Runtime |
.NET 8.0 (included in installer) |
9.2 Installation
Run the setup and select your language
Follow the on-screen steps
Launch from the Start Menu
Figure 15 — Installation language selection
9.3 Quick Start
Launch application and click Compressors
Configure Modbus TCP or RTU address
Click Start to begin listening
Connect your SCADA client
Place CSV logs and enable State-Based Simulation
10. Configuration Reference
|
Parameter |
Default |
Description |
|
IP Address |
192.168.1.100 |
Network address simulator binds to |
|
Port |
1520 |
TCP listening port |
|
Unit Count |
1 |
Simultaneous instances (max 8) |
11. Fault & Alarm Management
Two fault types: Manual Faults set by operator, and Condition-Based Faults triggered automatically when parameters exceed thresholds.
12. Multi-Language Support
Five display languages: English (EN), French (FR), German (DE), Spanish (ES), Chinese (ZH).
Figure 16 — Application in French
Figure 17 — Application in German
Figure 18 — Application in Spanish
Figure 19 — Application in Chinese
13. Compatibility
Works with: Ignition, FactoryTalk View, WinCC, Wonderware, AVEVA, KEPServerEX, Siemens, Rockwell, Schneider Electric, Modbus Poll, and custom applications using pymodbus, FluentModbus, or j2mod.
14. Troubleshooting
|
Symptom |
Cause |
Solution |
|
Server fails to start |
Port in use or firewall blocking |
Change port or add exception |
|
Client gets wrong values |
Unit address mismatch |
Match unit ID |
|
State-Based unavailable |
No training data |
Add CSV files |
|
Training slow |
Large CSV files |
Set Max Rows to 5000 |
15. Technical Specifications
|
Specification |
Value |
|
Platform |
Windows 10 / 11 (64-bit) |
|
Framework |
.NET 8.0, WPF |
|
Protocols |
Modbus TCP, Modbus RTU |
|
Max Instances |
8 simultaneous units |
|
Tick Rate |
100 ms |
|
Languages |
EN, FR, DE, ES, ZH |
|
Compressor Models |
TTS300/400/500/700, TGS230/520, TTH375, TGH285, VT Series |
|
Training Input |
CSV (M/d/yyyy H:mm:ss) |
|
Training Output |
JSON (TrainedStateTables.json) |
Document Information
|
Document Title |
Modbus System Simulator — User Guide |
|
Version |
2.0 |
|
Application Version |
1.2.3 |
|
Language |
English (EN) |
|
Website |
modbussim.com |
|
Last Updated |
February 2026 |
Modbus System Simulator is a product of modbussim.com. All rights reserved.
9. Getting Started
9.1 System Requirements
|
Component |
Requirement |
|
Operating System |
Windows 10 or Windows 11 (64-bit) |
|
RAM |
4 GB minimum |
|
Disk Space |
100 MB + training data storage |
|
Network |
Ethernet adapter (for Modbus TCP) |
|
Serial Port |
COM port or USB-to-Serial (for Modbus RTU) |
|
.NET Runtime |
.NET 8.0 (included in installer) |
9.2 Installation
Run the setup and select your language
Follow the on-screen steps
Launch from the Start Menu
Figure 15 — Installation language selection
9.3 Quick Start
Launch application and click Compressors
Configure Modbus TCP or RTU address
Click Start to begin listening
Connect your SCADA client
Place CSV logs and enable State-Based Simulation
10. Configuration Reference
|
Parameter |
Default |
Description |
|
IP Address |
192.168.1.100 |
Network address simulator binds to |
|
Port |
1520 |
TCP listening port |
|
Unit Count |
1 |
Simultaneous instances (max 8) |
11. Fault & Alarm Management
Two fault types: Manual Faults set by operator, and Condition-Based Faults triggered automatically when parameters exceed thresholds.
12. Multi-Language Support
Five display languages: English (EN), French (FR), German (DE), Spanish (ES), Chinese (ZH).
Figure 16 — Application in French
Figure 17 — Application in German
Figure 18 — Application in Spanish
Figure 19 — Application in Chinese
13. Compatibility
Works with: Ignition, FactoryTalk View, WinCC, Wonderware, AVEVA, KEPServerEX, Siemens, Rockwell, Schneider Electric, Modbus Poll, and custom applications using pymodbus, FluentModbus, or j2mod.
14. Troubleshooting
|
Symptom |
Cause |
Solution |
|
Server fails to start |
Port in use or firewall blocking |
Change port or add exception |
|
Client gets wrong values |
Unit address mismatch |
Match unit ID |
|
State-Based unavailable |
No training data |
Add CSV files |
|
Training slow |
Large CSV files |
Set Max Rows to 5000 |
15. Technical Specifications
|
Specification |
Value |
|
Platform |
Windows 10 / 11 (64-bit) |
|
Framework |
.NET 8.0, WPF |
|
Protocols |
Modbus TCP, Modbus RTU |
|
Max Instances |
8 simultaneous units |
|
Tick Rate |
100 ms |
|
Languages |
EN, FR, DE, ES, ZH |
|
Compressor Models |
TTS300/400/500/700, TGS230/520, TTH375, TGH285, VT Series |
|
Training Input |
CSV (M/d/yyyy H:mm:ss) |
|
Training Output |
JSON (TrainedStateTables.json) |
Document Information
|
Document Title |
Modbus System Simulator — User Guide |
|
Version |
2.0 |
|
Application Version |
1.2.3 |
|
Language |
English (EN) |
|
Website |
modbussim.com |
|
Last Updated |
February 2026 |
Modbus System Simulator is a product of modbussim.com. All rights reserved.
9. Getting Started
9.1 System Requirements
|
Component |
Requirement |
|
Operating System |
Windows 10 or Windows 11 (64-bit) |
|
RAM |
4 GB minimum |
|
Disk Space |
100 MB + training data storage |
|
Network |
Ethernet adapter (for Modbus TCP) |
|
Serial Port |
COM port or USB-to-Serial (for Modbus RTU) |
|
.NET Runtime |
.NET 8.0 (included in installer) |
9.2 Installation
Run the setup and select your language
Follow the on-screen steps
Launch from the Start Menu
Figure 15 — Installation language selection
9.3 Quick Start
Launch application and click Compressors
Configure Modbus TCP or RTU address
Click Start to begin listening
Connect your SCADA client
Place CSV logs and enable State-Based Simulation
10. Configuration Reference
|
Parameter |
Default |
Description |
|
IP Address |
192.168.1.100 |
Network address simulator binds to |
|
Port |
1520 |
TCP listening port |
|
Unit Count |
1 |
Simultaneous instances (max 8) |
11. Fault & Alarm Management
Two fault types: Manual Faults set by operator, and Condition-Based Faults triggered automatically when parameters exceed thresholds.
12. Multi-Language Support
Five display languages: English (EN), French (FR), German (DE), Spanish (ES), Chinese (ZH).
Figure 16 — Application in French
Figure 17 — Application in German
Figure 18 — Application in Spanish
Figure 19 — Application in Chinese
13. Compatibility
Works with: Ignition, FactoryTalk View, WinCC, Wonderware, AVEVA, KEPServerEX, Siemens, Rockwell, Schneider Electric, Modbus Poll, and custom applications using pymodbus, FluentModbus, or j2mod.
14. Troubleshooting
|
Symptom |
Cause |
Solution |
|
Server fails to start |
Port in use or firewall blocking |
Change port or add exception |
|
Client gets wrong values |
Unit address mismatch |
Match unit ID |
|
State-Based unavailable |
No training data |
Add CSV files |
|
Training slow |
Large CSV files |
Set Max Rows to 5000 |
15. Technical Specifications
|
Specification |
Value |
|
Platform |
Windows 10 / 11 (64-bit) |
|
Framework |
.NET 8.0, WPF |
|
Protocols |
Modbus TCP, Modbus RTU |
|
Max Instances |
8 simultaneous units |
|
Tick Rate |
100 ms |
|
Languages |
EN, FR, DE, ES, ZH |
|
Compressor Models |
TTS300/400/500/700, TGS230/520, TTH375, TGH285, VT Series |
|
Training Input |
CSV (M/d/yyyy H:mm:ss) |
|
Training Output |
JSON (TrainedStateTables.json) |
Document Information
|
Document Title |
Modbus System Simulator — User Guide |
|
Version |
2.0 |
|
Application Version |
1.2.3 |
|
Language |
English (EN) |
|
Website |
modbussim.com |
|
Last Updated |
February 2026 |
Modbus System Simulator is a product of modbussim.com. All rights reserved.
9. Getting Started
9.1 System Requirements
|
Component |
Requirement |
|
Operating System |
Windows 10 or Windows 11 (64-bit) |
|
RAM |
4 GB minimum |
|
Disk Space |
100 MB + training data storage |
|
Network |
Ethernet adapter (for Modbus TCP) |
|
Serial Port |
COM port or USB-to-Serial (for Modbus RTU) |
|
.NET Runtime |
.NET 8.0 (included in installer) |
9.2 Installation
Run the setup and select your language
Follow the on-screen steps
Launch from the Start Menu
Figure 15 — Installation language selection
9.3 Quick Start
Launch application and click Compressors
Configure Modbus TCP or RTU address
Click Start to begin listening
Connect your SCADA client
Place CSV logs and enable State-Based Simulation
10. Configuration Reference
|
Parameter |
Default |
Description |
|
IP Address |
192.168.1.100 |
Network address simulator binds to |
|
Port |
1520 |
TCP listening port |
|
Unit Count |
1 |
Simultaneous instances (max 8) |
11. Fault & Alarm Management
Two fault types: Manual Faults set by operator, and Condition-Based Faults triggered automatically when parameters exceed thresholds.
12. Multi-Language Support
Five display languages: English (EN), French (FR), German (DE), Spanish (ES), Chinese (ZH).
Figure 16 — Application in French
Figure 17 — Application in German
Figure 18 — Application in Spanish
Figure 19 — Application in Chinese
13. Compatibility
Works with: Ignition, FactoryTalk View, WinCC, Wonderware, AVEVA, KEPServerEX, Siemens, Rockwell, Schneider Electric, Modbus Poll, and custom applications using pymodbus, FluentModbus, or j2mod.
14. Troubleshooting
|
Symptom |
Cause |
Solution |
|
Server fails to start |
Port in use or firewall blocking |
Change port or add exception |
|
Client gets wrong values |
Unit address mismatch |
Match unit ID |
|
State-Based unavailable |
No training data |
Add CSV files |
|
Training slow |
Large CSV files |
Set Max Rows to 5000 |
15. Technical Specifications
|
Specification |
Value |
|
Platform |
Windows 10 / 11 (64-bit) |
|
Framework |
.NET 8.0, WPF |
|
Protocols |
Modbus TCP, Modbus RTU |
|
Max Instances |
8 simultaneous units |
|
Tick Rate |
100 ms |
|
Languages |
EN, FR, DE, ES, ZH |
|
Compressor Models |
TTS300/400/500/700, TGS230/520, TTH375, TGH285, VT Series |
|
Training Input |
CSV (M/d/yyyy H:mm:ss) |
|
Training Output |
JSON (TrainedStateTables.json) |
Document Information
|
Document Title |
Modbus System Simulator — User Guide |
|
Version |
2.0 |
|
Application Version |
1.2.3 |
|
Language |
English (EN) |
|
Website |
modbussim.com |
|
Last Updated |
February 2026 |
Modbus System Simulator is a product of modbussim.com. All rights reserved.
© 2026 modbussim.com
